Cisco Systems OL-24281-01, 2900 manual Configuring a Pattern, Selecting a Configured Pattern, 2-22

Chapter 2 Operation

Camera Configuration Tab

Configuring a Pattern

Figure 2-7 Preset/Pattern Page

Step 1 Place your mouse pointer over the Camera Configuration tab.

Step 2 Select Presets/Patterns from the drop-down menu.

Step 3 Select a pattern number from the Pattern drop-down menu.

Note Do not assign an existing pattern number to a new pattern or you will override the previously configured pattern.

Step 4 Click Start.

Step 5 Using the pan, tilt, and zoom control buttons, move the camera to a desired series of locations. Step 6 Click End to save the pattern settings.

Selecting a Configured Pattern

Configured patterns can be selected from the Live View page or the Preset/Patterns page.

	Cisco Video Surveillance IP PTZ Dome Camera User Guide, Cisco 2900 Series IP Dome
2-22	OL-24281-01