ClearOne comm operation manual PSR1212 Serial commands, Command Function

Appendices ~ Appendix E: Serial Commands					95
PSR1212 Serial commands
Command	Function	Command	Function
AAMB	Selects/reports adapt ambient setting	LOCK	Selects/reports the state of the preset and
AGC	Enable/disables AGC		macro lock. When on, the lock prevents presets
AMBLVL	Selects/reports ambient level			and macros that have been flagged from
BAUD	Selects/reports the baud rate of the serial port	being		altered in any way.
CGROUP	Selects/reports compressor group setting	LOCKPRST	Selects/reports whether the lock is applied to a
CHAIRO	Selects/reports chairman override setting		preset or macro. If a preset or macro has the
COMPRESS	Sets/reports compressor on audio processing		lock applied, it can be changed only if the unit
	channel		is unlocked with the password.
COMPSEL	Selects/reports compressor activity for	LOCKPWD	Selects/reports the password for the
	processor		preset/macro lock. This can be changed only if
DECAY	Sets/reports decay rate		the unit is unlocked.
DELAY	Sets/reports delay rate	LVL	Reports in, out, or processor level
DELAYSEL	Selects/reports processor channel delay	LVLREPORT	Selects/reports level status
DFLTM	Sets/reports default meter	LVLRRATE	Sets the level report rate for the unit
DID	Selects/reports device ID	MACRO	Executes macro or reports last macro
FILTER	Selects/reports input/processor channel filter		executed
	setting	MASTER	Reports the mode of the unit
FILTSEL	Enables/disables filters on input/processor	MAX	Changes/reports max gain setting for in, out,
	channel		processor block
FLOW	Selects/reports the flow control of the serial	MDMODE	Enables/disables the modem mode for the unit
	port	MIN	Changes/reports minimum gain setting for in,
FMP	Sets/reports 1st Mic Priority for mic gating		out, processor block
	group	MINIT	Sets/reports modem initialization string of
FPP	Sets/reports current passcode setting		serial port
GAIN	Changes/reports gain for in, out, or process.	MINMAX	Changes/reports min and max gain from in,
GATE	Reports gate status of channels 1–8		out, processor block
GHOLD	Selects/reports hold time setting	MLINE	Selects/reports coarse gain adjustments on
GMODE	Selects/reports gating mode setting		Inputs 1–8
GOVER	Selects/reports gating override setting	MMAX	Selects/reports max # of mics for each mic
GRATIO	Selects/reports gate ratio setting		group
GREPORT	Selects/reports gate status report frequency	MPASS	Sets passcode setting when using modem
GRPSEL	Selects/reports input gating group assignments		mode
LABEL	Selects/reports label of specified channel	MTRX	Selects/reports matrix routing of an in. to out.
LFP	Sets/reports status of front panel access	MTRXLVL	Selects/reports matrix level at the cross point
LMO	Selects/reports Last Mic On mode	MUTE	Sets/reports mute status

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760