|
| Direct Connect | |
|
|
|
|
|
|
| |
| Enable FMU | Select to enable the terminal to work with FMU. | |
| Client |
|
|
|
|
| |
| Connection | Select Direct. | |
| Group Name | Enter a group name, or leave blank to select the Default Group. | |
|
|
| |
| Update Time | This feature is disabled with Direct Connection. To enable, you must | |
|
| have an RF connection. See "RF Connection" on page 52. | |
|
|
|
|
Explore Terminal
Use the Microsoft ActiveSync Explore option to view directory structure on direct connect terminals. Refer to the PRG for your terminal for instructions on establishing a direct connection between the terminal and PC.
On direct connect terminals, the FMU Explore option is not available. Use the Microsoft ActiveSync Explore option for access to the terminal's directory structure. See the documentation for ActiveSync for information on this feature.
Updating Terminals
Placing the terminal in the dock will trigger an update. ActiveSync will initiate when the unit is in place. Next, the FMU Update dialog will appear and will remain active while the unit remains in the dock. See ActiveSync instructions in the terminal’s PRG.
Scheduled Update is not available on direct connect terminals. Updates are initiated each time the unit is docked and successfully connects to the host computer via ActiveSync.
Terminals should not be removed from the dock during the update process. Wait until
you see the FMU Update and FMU FAST Update indicating ‘Idle.’
CAUTION
User’s Manual | 51 |
