Dell 1950 owner manual Integrated Devices Screen

Integrated Devices Screen

Table 2-4 lists the options and descriptions for the information fields that appear on the Integrated Devices screen.

Table 2-4. Integrated Devices Screen Options

Option	Description
Integrated SAS Controller	Enables or disables the integrated SAS controller.
(Enabled default)
Embedded SATA	Allows the integrated SATA controller to be set to Off or ATA mode.
Controller
(Off default)
IDE CD-ROM Controller	Enables the integrated IDE controller. When set to Auto, each channel of the
(Auto default)	integrated IDE controller is enabled if IDE devices are attached to the channel and
	an external IDE controller is not detected.
	NOTE: This CD-ROM option will not appear on this menu screen if your system does
	not include this optional device.
User-Accessible USB Ports	Enables or disables the system's user-accessible ports. Options are All Ports On,
(All Ports On default)	Only Back Ports On, or All Ports Off. Disabling the USB ports makes system
	resources available for other devices.
Embedded Gb NIC1	Enables or disables the system's integrated NIC1. Options are Enabled without
(Enabled with PXE	PXE, Enabled with PXE, and Disabled. PXE support allows the system to boot
default)	from the network. Changes take effect after the system reboots.
MAC Address	Displays the MAC address for NIC1. This field does not have user-selectable
	settings.
TOE Capability	Displays the TCP/IP Offload Engine (TOE) feature status of NIC1.
Embedded Gb NIC2	Enables or disables the system's integrated NIC2. Options are Enabled without
(Enabled without PXE	PXE, Enabled with PXE, and Disabled. PXE support allows the system to boot
default)	from the network. Changes take effect after the system reboots.
MAC Address	Displays the MAC address for NIC2. This field does not have user-selectable
	settings.
TOE Capability	Displays the TCP/IP Offload Engine (TOE) feature status of NIC2.

38

Using the System Setup Program