Dell KP542 manual Quick Reference Guide

•If the power light is blinking green, the computer is in standby mode. Press a key on the keyboard, move the mouse, or press the power button to resume normal operation.

•If the power light is off, the computer is either turned off or is not receiving power.

–Reseat the power cable into both the power connector on the back of the computer and the electrical outlet.

–If the computer is plugged into a power strip, ensure that the power strip is plugged into an electrical outlet and that the power strip is turned on.

–Bypass power protection devices, power strips, and power extension cables to verify that the computer turns on properly.

–Ensure that the electrical outlet is working by testing it with another device, such as a lamp.

–Ensure that the main power cable and front panel cable are securely connected to the system board (see "System Board Components" in your User’s Guide).

•If the power light is blinking amber, the computer is receiving electrical power, but an internal power problem might exist.

–Ensure that the voltage selection switch is set to match the AC power at your location, if applicable.

–Ensure that the processor power cable is securely connected to the system board (see "System Board Components" in your User’s Guide).

•If the power light is steady amber, a device may be malfunctioning or incorrectly installed.

–Remove and then reinstall the memory modules (see "Memory" in your User’s Guide).

–Remove and then reinstall any cards (see "Cards" in your User’s Guide).

•Eliminate interference. Some possible causes of interference are:

–Power, keyboard, and mouse extension cables

–Too many devices on a power strip

–Multiple power strips connected to the same electrical outlet

32

Quick Reference Guide