Dell R210 owner manual Diagnostic Lights, Post

Diagnostic Lights

The four diagnostic indicator lights on the system front panel display error codes during system startup. Table 1-1 lists the causes and possible corrective actions associated with these codes. A highlighted circle indicates the light is on; a non-highlighted circle indicates the light is off.

Table 1-1. Diagnostic Indicator Code

Code Causes Corrective Action

The system is in a normal off condition or a possible pre-BIOS failure has occurred.

The diagnostic lights are not lit after the system successfully boots to the operating system.

Plug the system into a working electrical outlet and press the power button.

The system is in a normal	Information only.
operating condition after
POST.
BIOS checksum failure	See "Getting Help" on page 133.
detected; system is in
recovery mode.
Possible processor failure. See "Troubleshooting the
	Processor" on page 122.
Memory failure.	See "Troubleshooting System
	Memory" on page 116.
Possible expansion card	See "Troubleshooting an
failure.	Expansion Card" on page 121.
Possible video failure.	See "Getting Help" on page 133.

About Your System

19