Figure 3-18. Replacing the System Battery

1

1 system battery

3Locate the battery socket. See Figure 6-1.

CAUTION: To avoid damage to the battery connector, you must firmly support the connector while installing or removing a battery.

4To remove the battery, push the metal tab away from the battery until the battery pops out. See Figure 3-18.

5To install the new system battery, hold the battery with the "+" facing up, and aligned to the metal tab on the socket.

6Press the battery straight down into the socket until it snaps into place.

7Close the system. See "Closing the System" on page 63.

8Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.

9Enter the System Setup program to confirm that the battery is operating properly. See "Entering the System Setup Program" on page 38.

100

Installing System Components

Page 98
Image 98
Dell R210 owner manual 100, Replacing the System Battery System battery