
Message | Causes | Corrective Actions |
|
|
|
Memory set to | The memory frequency may | If not an intentional setting, |
minimum | be intentionally set lower for | check any other system |
frequency. | power conservation. | messages for possible causes. |
| The current memory | Ensure that your memory |
| configuration may support | configuration supports the |
| only the minimum | higher frequency. See |
| frequency. | "General Memory Module |
|
| Installation Guidelines" on |
|
| page 79. |
|
|
|
Memory tests | POST memory test was | Information only. |
terminated by | terminated by pressing the |
|
keystroke. | spacebar. |
|
|
|
|
MEMTEST lane | Invalid memory | Ensure that the memory |
failure | configuration. A mismatched | modules are installed in a |
detected on x. | memory module is installed. | valid configuration. See |
|
| "General Memory Module |
|
| Installation Guidelines" on |
|
| page 79. |
No boot device | Faulty or missing optical |
available. | drive subsystem, hard drive, |
| or |
| no bootable USB key |
| installed. |
Use a bootable USB key, CD, or hard drive. If the problem persists, see "Troubleshooting a USB Device" on page 110, "Troubleshooting an Optical Drive" on page 119, and "Troubleshooting a Hard Drive" on page 120. See "Using the System Setup Program and UEFI Boot Manager" on page 37 for information on setting the order of boot devices.
26
About Your System