Figure 3-3. Opening and Closing the System Cover

1

2

1

latch release lock

2

indent

Closing the System

1Place the cover onto the chassis and offset it slightly toward the back of the system, so that the two hooks on the back edge of the cover fit over the corresponding slots on the back edge of the chassis. See Figure 3-3.

2Slide the cover toward the front of the chassis till it snaps in position.

3Rotate the latch release lock in a clockwise direction to secure the cover.

Installing System Components

63

Page 61
Image 61
Dell R210 owner manual Opening and Closing the System Cover Latch release lock