9Enter the System Setup program and ensure that the hard drive’s controller is enabled. See "Entering the System Setup Program" on page 38.

10Exit the System Setup program and reboot the system.

See the documentation that came with the hard drive for instructions on installing any software required for drive operation.

Removing a Hard Drive From a Hard-Drive Bracket

NOTE: A 2.5-inch hard drive is encased in a 2.5-inch hard-drive bracket which is further encased in a 3.5-inch hard-drive bracket.

1Remove the four screws from the slide rails on the hard-drive bracket.

If you are removing a 2.5-inch hard drive, separate the 2.5-inch hard-drive bracket from the 3.5-inch hard-drive bracket.

2Separate the hard drive from the bracket. See Figure 3-6.

70

Installing System Components

Page 68
Image 68
Dell R210 owner manual Removing a Hard Drive From a Hard-Drive Bracket