4

Deploying the PERC card

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the system.

This document provides a set of high-level installation and removal instructions for the following Dell PowerEdge RAID Controllers (PERC) 9 series:

1.PERC H330 Adapter

2.PERC H330 Mini Monolithic

3.PERC H330 Slim Card

4.PERC H330 Mini Blade

5.PERC H730 Adapter

6.PERC H730 Mini Monolithic

7.PERC H730 Slim Card

8.PERC H730 Mini Blade

9.PERC H730P Adapter

10.PERC H730P Mini Monolithic

11.PERC H730P Slim Card

12.PERC H730P Mini Blade

13.PERC H830 Adapter

14.PERC FD33xS Card

15.PERC FD33xD Card

NOTE: For detailed information on cabling the PERC 9 cards, see the system documentation at

dell.com/poweredgemanuals.

Removing the PERC 9 adapter

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1.Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and peripherals.

39

Page 39
Image 39
Dell UCSB-900, UCSE-900, UCSA-901, UCPA-901, UCPB-900, and UCPE-900 manual Deploying the Perc card, Removing the Perc 9 adapter