After removing the power source from the equipment, wait at least 10 minutes before touching or disconnecting sections of the equipment that normally carry electrical charges (e.g., capacitors, contacts, screw connections). To be safe, measure the electrical contact points with a meter before touching the equipment.
The following text formats are used in this manual to indicate a potential for personal injury or equipment damage. Read the safety notices in this manual before attempting installation, operation, or maintenance to avoid serious bodily injury, damage to the equipment, or operational difficulty.
WARNING:
A Warning identifies hazards that could result in personal injury or death. It precedes the discussion of interest.
Caution:
A Caution identifies hazards that could result in equipment damage. It precedes the discussion of interest
Note:
A Note identifies information critical to the user’s understanding or use of the equipment. It follows the discussion of interest.
