GB | DESCRIPTION (See page 18) |
1.OPERATOR’S MANUAL - Included with unit. Read before operation and keep for future reference to learn proper, safe operating techniques.
2.FRONT HAND GUARD - Guard between the front handle and the saw chain for protecting the hand from injuries and aiding in control of the chain saw if the hand slips off the handle. This guard is used to activate the chain brake which is to stop the saw chain rotation.
3.CHOKE CONTROL KNOB - Device for enriching the fuel/air mixture in the carburettor to aid cold starting.
4.REAR HAND GUARD - Extension on the lower part of the rear handle for protecting the hand from the chain if it breaks or degrooves.
5.CLUTCH COVER - Protective cover to the guide bar, saw chain, clutch and sprocket when the chain saw is in use.
6.CHAIN TENSION ADJUSTER - Device to adjust chain tension.7.CHAIN CATCHER - A projection designed to reduce the risk of the operator’s right hand from being hit by a chain which has broken or derailed from the guide bar during cutting.
8.GUIDE BAR - The part that supports and guides the saw chain.
9.CHAIN - Chain, serving as a cutting tool.
10.SPIKED BUMPER - Devise, fitted in front of the guide bar mounting point, acting as a pivot when in contact with a tree or log.
11.OIL TANK CAP - For closing the oil tank.
12.FRONT HANDLE (FOR THE LEFT HAND) - Support handle located at the front of the engine housing.
13.STARTER HANDLE - The grip of the starter, for starting the engine.
14.FUEL TANK CAP - For closing the fuel tank.
15.IGNITION SWITCH - Device for connecting and disconnecting the ignition system and thus allowing the engine to be started or stopped.
16.THROTTLE TRIGGER - Device activated by the operator’s finger, for controlling the engine speed.
17.REAR HANDLE (FOR THE RIGHT HAND) - Support handle located towards the rear of the engine housing.
18.THROTTLE TRIGGER LOCKOUT - A safety lever which must be depressed before the throttle trigger can be activated in order to prevent the accidental operation of the throttle trigger.
19.THROTTTLE LATCH - Device for temporality setting the throttle in a partially open position to aid starting.
20.SAFETY DECAL - Part Number
21.CYLINDER COVER - The cooling air flow grill. It cover the cylinder, spark plug, silencer and air filter.
22.GUIDE BAR COVER - Remove device for covering the guide bar and saw chain during transport and other times when the chain saw is not in use.
E N G L I S H
D E U T S C H
I
T A L I A N O
19 |