
5.4: RS-485 Connection—Nexus Meter to a Computer or PLC
Use any Port on the Nexus 1250/1252. If you use Port 1, set the selector switch beneath the port to
The link using
You must use an
Do not use the
5.5:
Use
The length of the connection using
To connect with other Nexus 1250/1252 Meters in either local or remote locations, you MUST use Port 2 as a Master and an
The link using
For more information on the Nexus Meter with the Internal Modem Option, see Chapter 10 of this manual.
5.6:
The Internal Network Option conforms to the IEEE 802.3, 10BaseT specification using unshielded twisted pair (UTP) wiring. This allows the use of inexpensive
Using this LAN connection allows multiple PC’s to be connected concurrently. The
The connection using
To connect with other Nexus Meters in either local or remote locations, you MUST use Port 2 (which is labeled Ethernet Gateway) as a Master and an
For more information on the Nexus 1250/1252 Meter with the Internal Network Option, see Chapter 11 of this manual.
Electro Industries/GaugeTech Doc # E107706 V1.25 |