Electro-Voice 1252, 250 operation manual Dynamic Readings Mode

6.3: Dynamic Readings Mode

The External Display puts itself in the Dynamic Readings Mode upon power-up. Use the MODE button to access the Dynamic Readings from other Modes. Use the UP/DOWN arrows to navigate from Group to Group within this Mode. See section 6.4 for a navigational map of the Dynamic Readings Mode.

Group 1: Phase to Neutral Voltages (Use the LEFT/RIGHT arrows to access the following readings, in order.)

•Volts AN/BN/CN

•Maximum Volts AN/BN/CN

•Minimum Volts AN/BN/CN

•Volts AN/BN/CN %THD

•Volts AN/BN/CN Maximum %THD

•Volts AN/BN/CN Minimum %THD

Group 2: Phase to Phase Voltages (Use the LEFT/RIGHT arrows to access the following readings, in order.)

•Volts AB/BC/CA

•Maximum Volts AB/BC/CA

•Minimum Volts AB/BC/CA

Group 3: Current (Use the LEFT/RIGHT arrows to access the following readings, in order.)

•Current A/B/C

•Maximum Current

•Minimum Current

•Current %THD

•Current Maximum %THD

•Current Minimum %THD

•Current Calculated N/Measured N

•Maximum Current Calculated N/Measured N

Group 4: Watt/VAR (Use the LEFT/RIGHT arrows to access the following readings, in order.)

•kWatt/kVAR

•Maximum +kWatt/+kVAR/CoIn kVAR

•Maximum -kWatt/-kVAR/CoIn kVAR

•Block (Fixed) Window Average Maximum +kWatt/+kVAR/CoIn kVAR

•Predictive Rolling (Sliding) Window Maximum +kWatt/+kVAR/CoIn kVAR

Group 5:VA/PF/Frequency (Use the LEFT/RIGHT arrows to access the following readings, in order.)

•kVA/PF lag/Hz

•Maximum kVA/Hz

•Minimum kVA/Hz

Electro Industries/GaugeTech Doc # E107706 V1.25 6-3