Enterasys Networks 7G4285-49, 7G4205-72 manual Lanview LEDs, Color State Recommended Action

			Using LANVIEW
Table 4-1 LANVIEW LEDs
LED	Color	State	Recommended Action
MGMT	Off	Off. This DFE module is NOT	None.
		the Management Module.
	Green	Solid. This module is the	None.
		designated Management
		Module.
	Amber	Flashing. This is a	None.
		temporary indication that the
		DFE module is saving data.
CPU	Off	Power off.	Ensure chassis has adequate power.
	Amber	Blinking. DFE module in	None.
		process of booting.
		Solid. Testing.	If the LED remains amber for several
			minutes, contact Enterasys Networks
			for technical support.
	Green	Blinking. Image starts	None.
		running.
		Solid. Functional.	None.
	Red	Solid. Processor in reset.	None.
	Green and	Blinking. Indicates that the	None. This state is activated when the
	Amber	DFE module is in the process	OFFLINE/RESET switch is pressed for
		of shutting down.	less than 1 second to start the process
			of an orderly shutdown.
			While in this state, do not remove any
			DFE module.
	Amber and	Alternating (67% on, 33%	While in this state, you have 60
	off	off). Indicates that a	seconds to safely remove the DFE
		shutdown process has	module from the chassis.
		completed. This indication
		will remain for 60 seconds

before automatically restarting.

DFE-Platinum Series Hardware Installation Guide 4-5