The IRM2 Chassis View
3.Click on 
. The selected port association will take effect; one port will become the active repeater interface and the other will be administratively disabled. The Chassis View display for the IRM2 module will update to reflect the change.
Setting a Board Name
From the Board menus on the Chassis View window, you can change the names of the manageable boards installed in your MMAC.
To name a board:
1.Click on the appropriate Board number to access the board menu.
2.Drag down to Name.... The Board Name Text Box, Figure
Figure 2-10. Board Name Text Box
3.Enter the name of the board, up to 20 characters in length.
4.Click on 
.
Your new name will be applied to the board, and will appear in a number of
Enabling Boards
From the Board menus in the Chassis View window, you can enable any manageable boards in your MMAC that are currently disabled by management.
To enable a board:
1.Click on the desired Board number to access the board menu.
2.Drag down to Enable. Your board will now be enabled, and the port status for disabled ports will change from OFF to the appropriate status (ON, SEG, LNK, or NLK).
Managing the Hub |
