Statistics
To choose Total or Delta:
1.Click on the Total radio button; after the completion of the current polling cycle plus one complete polling cycle, the screen will display the total count of statistics processed since the most recent
2.Click on the Delta radio button; after the completion of the current polling cycle plus two more polling cycles, the screen will display the count of statistics processed during the last poll interval. These counts will be refreshed after each polling interval.
Timer Statistics
You can use the Timer Statistics windows to gather statistical information concerning your IRM2 and its boards and/or ports over a
•Green (Elapsed) — Indicates the level of activity during the last time interval.
•Blue (Average) — Indicates the average levels of activity over all timer intervals since the window was invoked.
•Magenta (Peak) — Indicates the peak level of activity over all time intervals since the window was invoked.
The displayed statistics will automatically update using the time interval you have set; allowable time intervals range from one second to 23 hours/59 minutes/59 seconds. You can also refresh the statistics accumulated in the Timer
Statistics window at any time by clicking 
. This will only reset the counters at the Timer Statistics window; the statistical counts maintained by the
device are not affected. The time under the 
button will also update, indicating the last time that the Timer Statistics window was cleared.
NOTE |
The time interval set in the Timer Statistics window functions independently from the polling interval you have set for your software during installation.
Accessing the Timer Statistics Windows
To access the Repeater Timer Statistics window:
Timer Statistics |
