Enterasys Networks IRM2 manual Resetting Device Counters, Restarting the Device

The IRM2 Chassis View

NOTE

2.Enter the new time in a 24-hour hh:mm:ss format, either by highlighting the field you wish to change and using the up and down arrow buttons, or by simply entering the new value in the appropriate field.

3. Click on to save your changes, or on to cancel.

To edit the device date:

1.Click on Device on the Chassis View window menu bar to access the Device menu; drag down to Edit Device Date..., and release. The following change window, Figure 2-8, will appear.

Figure 2-8. Edit Date Window

2.Enter the new date in a mm/dd/yy format, either by highlighting the field you wish to change and using the up and down arrow buttons, or by simply entering the new value in the appropriate field.

3. Click on to save your changes, or on to cancel

.

In accordance with Year 2000 compliance requirements, NetSight Element Manager now displays and allows you to set all date s with four-digit year values..

Resetting Device Counters

To refresh statistics totals, you can reset counter information for your IRM2 back to zero. To do so:

1.Select Repeater from the Chassis View menu; drag down to Reset Counters and release.

Restarting the Device

You can use the Restart Device option to perform a warm boot of the IRM2. This will reset all counter information to zero and refresh system uptime.

Managing the Hub 2-15