Epson 6110i You have forgotten the password, The remote control is not available, You don’t see your projector in the EMP Monitor window

Solving Password Problems

You have forgotten the password.

■Write down the request code that appears in the Password Protect Release screen and contact Epson. See page 106.

■If you turned on the password protect feature before setting the password and no password was set before, try using the default password: 0000.

The remote control is not available.

You must have the remote control to enter the password. You can purchase a replacement remote control from Epson. See page 107.

Solving EMP Monitor Problems

You don’t see your projector in the EMP Monitor window.

■Make sure that you’ve connected the projector to the network and configured it correctly; see page 75. Also, make sure you’ve registered the projector with EMP Monitor. See page 79.

■Make sure that Standby Mode in the Extended menu is set to

Network On.

■If the computer you are using is running Windows XP, 2000, or NT 4.x, you must be logged in as the Administrator.

■Try restarting your computer.

104Solving Problems