■User’s Logo

Turn this setting On to display the image or logo you have captured whenever the projector is turned on. See page page 66 for more information.

■Projection

Front: Projector is in front of the screen.

Front/Ceiling: Projector is in front of the screen, mounted upside-down from the ceiling.

Rear: Projector is behind the screen.

Rear/Ceiling: Projector is behind the screen, mounted upside-down from the ceiling.

■Operation

Direct Power On: When this feature is enabled, projection starts as soon as you plug in the power cord. You don’t have to press the P Power button.

Sleep Mode: When this feature is enabled, the projector’s lamp automatically turns off when the projector has not received any input signals for more than 30 minutes. This conserves electricity, cools the projector, and extends the life of the lamp. To resume projecting, press the P Power button.

Sleep Mode Timer: When the Sleep Mode setting is enabled, you can set the period of time before the projector turns off automatically, from 1 to 30 minutes.

High Altitude Mode: Turn this setting On when using the projector above an altitude of 4,921 feet (1,500 meters). This setting ensures that the internal temperature of the projector is regulated properly. Turn this setting off for lower elevations.

■Standby Mode

Select Network On to use the network monitoring and control functions while the projector is in standby mode (the P Power light is orange).

note

When Direct Power On is enabled, press the P Power button to turn the projector off, wait until the P Power light remains solid orange, then unplug the projector.

Configuring the Projector 61