note

If you’re using a network management utility running SNMP, you can configure your network to send trap alerts (see page 76). This feature is intended for use by network administrators only.

Monitoring the Projector Over a Network

The software included with your projector lets you control your projector(s) over a network.

■Use EMP Monitor (available for Windows only) to see your projectors’ status, switch image sources, and control basic settings.

■Use the e-mail notification function to receive alerts about possible problems.

■Use a network management utility running SNMP to manage your facility’s equipment from a pre-existing system.

To use the software to manage your projectors, first install EMP Monitor. Then connect and configure each projector you want to monitor as described here.

This chapter covers the following information:

■Installing the network software

■Connecting the projector a network

■Selecting network settings

■Monitoring and controlling the projector with EMP Monitor

■Using e-mail alerts

■Using a browser to monitor the projector

■Understanding the notifications messages

73