3.Use the 
pointer button to highlight User’s Logo, then press the Enter button.
note
If the User’s Logo Protect function is enabled, you see a message that the logo cannot be recorded. You’ll need to disable the User’s Logo Protect function before you can create or change the User’s Logo. See page 70.
4.When you see the message Choose this image as the User’s Logo?, select Yes and press Enter. A selection box displays over the image.
5.Use the 
pointer button on the remote control to select the area of the image you want to use. Once you have selected the
area, press Enter.
6.When you see the message Select this image?, choose Yes and press Enter.
If you want to change the area selected, select No, press Enter and repeat steps 4 through 6.
Configuring the Projector 67