Light | Status | Description |
|
|
|
| Red | The lamp may be burned out. First make sure the lamp cover is securely |
|
| installed. If that’s not the problem, remove the lamp and replace it as |
| Flashing red | described on page 89. If this does not resolve the problem, contact |
|
| Epson as described on page 106. |
|
| The lamp may be cracked or installed incorrectly. Check the lamp; if it is |
|
| cracked, you must replace it (as described on page 89) before you can |
|
| use the projector again. |
|
| If checking the lamp installation and replacing the lamp does not solve |
|
| the problem, contact Epson as described on page 106. |
|
|
|
| Red | The projector is shut down automatically because of an internal problem. |
|
| Remove the power cord and contact Epson for help, as described on |
| Flashing red | |
|
|
|
Viewing Lamp Usage and Other Information
Use the Info menu to view information about the image source, the display settings of your computer, and the number of hours the lamp and filter has been used.
Press the Menu button, select Info, then press Enter.
You see the lamp and air filter usage hours and various input signal settings on the right:
Lamp usage
Filter usage
note
The information displayed depends on the input signal currently selected.
The lamp typically lasts about 4000 hours. If the number shown is close to that, make sure you have a spare lamp handy. If you’ve installed a new lamp, be sure to reset the lamp timer (see page 91).
Solving Problems 97