If none of the suggestions solves your problem, see additional solutions to problems in the following sections.
Checking Projector Status
If your projector isn’t working correctly, first turn it off, wait for it to cool (the P Power light stops flashing orange), and unplug it. Then plug the power cord back in and turn on the projector. If this doesn’t solve the problem, check the lights on top of the projector.
What To Do When the Lights Flash
The lights on top of the projector indicate the projector’s status and let you know when a problem occurs.
Power light | Lamp light |
| Temperature light |
|
Filter light
Refer to the following table for a complete description of the projector’s status lights and their meaning:
Light | Status | Description |
|
|
|
| Orange | The projector is in sleep mode. You can unplug it or press the Power |
|
| button to turn it on. |
|
|
|
| Flashing green | The projector is warming up. Wait for the image to appear. |
|
|
|
| Green | The projector is operating normally. |
|
|
|
| Red | High Temperature Warning. Although this is not an abnormal condition, |
|
| projection will stop automatically if the temperature rises too high again. |
| Flashing orange | Make sure there is plenty of space around and under the projector for |
|
| ventilation, and that the air filter is clean (see page 87). |
|
|
|
Solving Problems 95