Changing the Pointer Shape

Follow the steps below to change the pointer shape.

1.Press the Menu button on the remote control, highlight the Settings menu, and press Enter.

You see this screen:

2.Highlight Pointer Shape and press Enter.

3.Select the pointer you would like to use, then press Enter to select it.

4.When you have finished selecting a pointer shape, press the Menu button to exit the menu system.

Operating Two or More Projectors with the Remote Control

If you’re using more than one projector, you can control all the projectors—or just selected ones—by using the projector ID system. To operate a projector, you have to set the remote control’s ID to match that of the projector. Or you can control all the projectors at once by setting the remote control’s ID to zero.

Using the Remote Control 47