Connecting a Component Video Source

1.Locate a component-to-VGA video cable (you can purchase one from Epson; see page 14).

2.Connect the RCA end of the cable to your player and the VGA end to the Computer1 port on the projector.

3.If you want to play sound through the projector, see page 27 for instructions on connecting an audio cable.

4.If you don’t need to make any other connections, see Chapter 2 for instructions on turning on the projector and adjusting the image.

5.Once the projector is turned on, enter the projector’s Signal menu and make sure Computer1 is set to Auto; see page 56.

Setting Up the Projector 21