note

You can also set e-mail alerts from the projector’s menu system (see page 77).

Low air flow error. The air filter needs to be cleaned or replaced; see page 87.

Air filter air flow sensor error. Contact Epson as described on page 106.

Lamp cover door open. Close the lamp cover door; see page 89.

Lamp error. The lamp may need to be replaced; see page 89.

Lamp failure at power on. The lamp has reached its end of life or is installed incorrectly; see page 89.

High internal temperature error. The projector is turned off automatically.

Internal (system) error. Contact Epson as described on page 106.

Fan error. Contact Epson as described on page 106.

Sensor error. Contact Epson as described on page 106.

Other error. Contact Epson as described on page 106.

Using E-mail Alerts

You can set up e-mail alerts to warn you of problems with the projector.

1.Open EMP Monitor.

2.From the Tool menu, select Mail notification function.

3.Turn the Mail notification function setting On.

4.Enter the IP address and port number of your network’s SMTP (outgoing) mail server.

5.Enter the Sender (projector) mail address.

6.Enter up to three e-mail addresses to send alerts to in the Recipient mail address boxes.

7.Click the Notification event buttons to select the conditions under which an e-mail alert will be sent.

82Monitoring the Projector Over a Network