note
If a button is pressed longer than 60 seconds, the remote control stops operating to conserve power. When you release the button, normal operation resumes.
Using the Remote Control
Before using the remote, make sure batteries are installed as described on page 43. Then, refer to the tips below:
■Point the remote control either at the front or back of the projector, or at the screen.
■Stand within about 30 feet of the projector.
■Avoid using the remote under bright fluorescent lamps or in direct sunlight, or the projector may not respond properly.
note
The projector has equivalent buttons that you can use on its control panel:
MenuEsc
buttonbutton
Arrow buttons
Enter button
Using the Navigation Buttons
The remote control has various buttons that let you navigate the projector’s help and menu systems; they also let you use the drawing tools to highlight your presentation.
Pointer button (controls pointer movement)
Enter button | Esc button |
For details on using the buttons to control specific features, see the following sections:
■to navigate the projector’s menu system, see page 52
■to use the projector’s help system, see page 94
■to highlight your presentation, see page 46
42Using the Remote Control