note
To shut down the projector, see page 39. Shutting down the projector correctly prevents premature lamp failure and possible damage from overheating.
Turning On Your Equipment
Make sure your projector and other equipment are set up as described in Chapter 1. Then follow the instructions below to start the projector and display an image.
Turn on any connected computer or video equipment before starting the projector. This lets the projector automatically detect and display the image source. If you turn on the projector first, or have multiple pieces of connected equipment, you may have to select the image source manually (see page 32).
Turning On the Projector
Follow these steps to turn on the projector:
1.Plug one end of the power cable into the projector, and the other end into a grounded electrical outlet.
2. Wait until the P Power light stops flashing and turns orange.
Power light
30Projecting