If you’ve added the program to the Startup programs folder, it may already be open. If so, click the icon in the system tray on the lower-right corner of your screen to display the EMP Monitor window:

Click here to start EMP Monitor

To close EMP Monitor, select Exit from the File menu or right-click the program icon shown above, then select Exit.

Registering a Projector

Before you can monitor a projector, you have to register it. Follow these steps to automatically search for your projector(s).

1.Open EMP Monitor.

2.Select Edit > New > Projector (automatic search).

3.Click Search to locate projectors currently operating on the network.

4.Select the projector you want to add by clicking its name, then click the Edit button.

5.Enter a Display name, select a Parent group, if necessary, enter a Monitor Password, if necessary, and a Description for the projector.

6.Click the Register button.

7.To register additional projectors with EMP Monitor, repeat steps 2 through 6.

8.When you’re done adding projectors, click Cancel. You see a screen with a list of all registered projectors.

note

If the projector is not automatically found, your projector may not be connected or configured correctly for the network. See page 75.

To delete a projector from the list, right-click the projector name, and click Delete.

Monitoring the Projector Over a Network 79