note
If you are prompted for a password. Press and hold down the Num key on the remote control while you use the numeric keypad to enter the password.
If you enter the password incorrectly three times in succession, the projector’s operation is locked and you’ll need to turn it off and disconnect the power cord, then reconnect it. If an incorrect password is entered 30 times in succession, the projector is locked and you’ll need to contact Epson to unlock it. See “Where To Get Help” on page 106.
Protecting Projector Settings
You can password protect the User’s Logo and Network settings to prevent them from being changed. Make sure you’ve set a password for the projector as described on page 69, then follow the steps below:
1.Press and hold down the Freeze button until you see the Password Protect menu.
2.To protect your logo from being changed or disabled, select
User’s Logo Protect and press Enter.
3.Select On and press Enter.
4.To protect your network settings from being changed, select
Network Protect and press Enter.
5.Select On and press Enter.
6.Press Menu to exit the Password Protect menu.
If you lose the remote control, you will not be able to enter the password, so keep the remote control in a safe place at all times.
70Configuring the Projector