■SNMP

If you’re a network administrator, you can use the SNMP option to enter a Trap IP Address. This lets you receive trap alerts for the projector on a computer running the SNMP Manager software.

■Mail

When enabled, the projector sends you an e-mail alert if it has any problems. For instructions on setting up e-mail alerts, see the next section.

■AMX Device Discovery

Allows the projector to be detected when it’s connected to an AMX™ controller or a network that supports AMX Device Discovery.

■Projector Name

Displays the name for identifying the projector over the network.

Using Projector E-mail Alerts

When this feature is enabled, the projector sends you an e-mail alert if it has any problems.

1.Press the Menu button, select the Network menu, and press

Enter.

2.Select Mail and press Enter.

3.Select the following settings as necessary:

■Mail Notification

Select On to enable sending of an e-mail if there is a problem with the projector.

■SMTP Server

Enter the IP address of your SMTP server. You can enter a number from 0 to 255 in each field of the address.

■Port Number

Displays the SMTP port number.

note

If you’re a network administrator, you can use the SNMP option to enter a trap IP address. This lets you receive trap alerts for the projectors you’re monitoring.

note

You can also set e-mail alerts from EMP Monitor (see page 82).

Monitoring the Projector Over a Network 77