■Air Filter Setting
Alarm Timer: Lets you turn the air filter replacement notification on or off. If you are using the smoke air filter, make sure this setting is turned On.
Timer: Lets you change the amount of time the projector waits before displaying the air filter replacement notification.
Clean Notice: When this setting is enabled, the projector displays a message when the air filter is clogged with dirt or dust.
Clean Notice Timing: Lets you select from five intervals at which the cleaning notice is displayed. If the projector is being used in a dusty environment, set this setting to Level 1 (Early).
■Projector ID
Lets you assign a numeric ID to each projector. When you are using multiple projectors, you can use the ID to select the one you want to operate with the remote control. See page 47 for instructions.
■
Screen ID: Lets you set individual IDs for multiple projectors when performing Image Correction adjustments. This allows you to use one remote control for all of the projectors. To select a projector, press and hold the Num button on the remote control while pressing the number button that corresponds to the projector’s Screen ID.
Image Correction
Adjustment Level: Select each Adjustment Level (1 to 5) one at a time and adjust the Brightness Correct and Color Correct settings until the projected images match on all of the projectors.
Brightness Correct: Lets you adjust the difference in brightness for each projector.
Color Correct: Lets you adjust the difference in color for each projector.
62Configuring the Projector