Cleaning the Air Filter

Clean the air filter when you see any of the following messages: The air filter is clogged. Clean or replace the air filter. or Check or Replace the air filter. Dust clogs prevent proper ventilation and can cause overheating and damage the projector.

Follow these steps:

1.Turn off the projector and unplug the power cord.

2.To clean the filter, Epson recommends using a small vacuum cleaner designed for computers and other office equipment. If you don’t have one, gently clean the filter using a very soft brush (such as an artist’s paint brush).

You can remove the air filter to clean both sides.

3.When you have finished cleaning the air filter, close the cover and reset the timer as described on page 88.

4.If the dirt is difficult to remove or a filter is broken, replace the filter as described below.

Replacing the Air Filter

Replace the air filter when you see the Check or Replace the air filter message. Dust clogs prevent proper ventilation and can cause overheating and damage the projector.

To obtain a replacement air filter, contact your dealer or call Epson at

(800)873-7766 in the United States to obtain a new one. In Canada, please call (800) 463-7766 for dealer referral.

note

If the air filter has been stained by tobacco smoke, it cannot be cleaned. Replace the filter as described below.

Maintaining the Projector 87