note

If a critical problem develops with a projector which causes it to suddenly stop working, it may not be possible for the projector to send a message.

If Standby Mode is set to Network On in the Extended menu, the projector can still be monitored even if the projector is in standby mode (when the power is off).

■Address 1/2/3 Setting

Choose one of the Address Setting fields, then enter the e-mail address where you want to receive a message when a problem occurs.

4.When you’re done, press Menu to exit the menu system.

When a problem occurs, an e-mail message is sent to the specified addresses with the subject line EPSON Projector and the following information:

■Line 1: The name of the projector where the problem has occurred

■Line 2: The IP address of the projector where the problem has occurred

■Line 3: Details of the problem

Using EMP Monitor

EMP Monitor lets you use a remote computer to manage your projectors. It lets you easily turn them on or off (together or individually), switch image sources, and check on their status.

Before using EMP Monitor, make sure you’ve installed the software (available for Windows only) as described on page 74. The computer you’re using to monitor the projector should already be connected to your network.

Opening and Closing EMP Monitor

To start EMP Monitor, click Start > Programs or All Programs > EPSON Projector > EMP Monitor.

78Monitoring the Projector Over a Network