8.4.9.8 SYSTem:COMMunicate:SERial:LINefeed<bool>|MIN|MAX|DEF
Sets the state of the serial port linefeed setting.
SYST:COMM:SER:LINON
The <bool>parameter turns linefeed on (1 or ON) or off (0 or OFF). Spec-
ifying the MIN, MAX, or DEF parameter sets the linefeed to the minimum,
maximum, or defaultrespectively.
8.4.9.9 SYSTem:COMMunicate:SERial:TIMe? [MIN|MAX|DEF]
Returnsthe serial port sample period setting.
SYST:COMM:SER:TIM?
1
Specifying the MIN parameter returns a value of 0.1. Specifying the MAX pa-
rameter returns a valueof 3600. Specifying the DEF parameter returns a value
of 1.
8.4.9.10 SYSTem:COMMunicate:SERial:TIMe<num>MIN|MAX|DEF
Sets to serial port sample period setting.
SYST:COMM:SER:TIM10
The <num>p arametercan be one of the following values: 0.1, 0.2, 0.5, 1, 2, 5,
10, 30, 60, 120, 300, 600, 1800 or 3600. The unitsare seconds. If a value other
than one listed here is used, the instrument automatically selects the nearest ac-
ceptablevalue that is less than the value entered. Values greater than 3600 or
lessthan 0.1 are ignored. Specifying the MIN, MAX or DEF parameter sets the
sample period setting to the minimum, maximum, or default value respectively.
8.4.9.11 SYSTem:KLOCkout? [MIN|MAX|DEF]
Returnsthe state of the keypad lockout.
SYST:KLOC?
0
A valueof 1 is returned if the keypad is locked out. A value of 0 is returned if
the keypadis enabled (unlocked). Specifying the MIN parameter returns a
valueof 0. Specifying the MAX parameter returns a value of 1. Specifying the
DEF parameter returns a valueof 0 .
8.4.9.12 SYSTem:KLOCkout<bool>|MIN|MAX|DEF
Sets the state of the keypad lockout.
SYST:KLOC1
113
8 Digital Communications Interface
Commands