4 Quick Start
This section briefly explainsthe basics of setting up and operating your 1529
Thermometer Readout.

4.1 Unpacking

Carefullyunpack the 1529 thermometer readout. Verify that the following
items are present:
•1529 Thermometer Readout (The battery inside the 1529 is completely
charged when shipped. Initial charging is not required.)
•AC Adapter/Charger and power cord
•Serial Cable
•User’s Guide
•Report of Calibration with calibration label
•Probe (optional-must be purchased separately)
•Two ferrites (for use with probes as described in Section4.4.1, Using the
Clamp-on Ferites)
If all items are not present, contact an Authorized Service Center (see Section
1.3)

4.2 Use Proper Care

Youmust understand the safety issues related to the 1529. Be aware that poten-
tial hazards existdue to high temperatures and battery chemicals. Carefully
read the Warningsin Section 1.2.1 and Cautions in Section 1.2.2.
The 1529 and anythermometer probes used with it are sensitive instruments
that can be easily damaged. Alwayshandle these devices with care. DO NOT
allowthem to be dropped, struck, stressed, or over-heated.

4.3 Learn About the Features and Components

Familiarizeyourself with the features and accessories of the 1529 by reading
Section 5, Partsan d Controls.

4.4 Connect the Probe

The PRT/thermistoror thermocouple probe connects on the back panel of the
1529 using patentedmini-DWF connectors (PRT/thermistor) or the universal
receptacles (thermocouples).
11
4 Quick Start
Unpacking