8.4.10.7 SYSTem:TIME?
Returns the current system time.
SYST:TIME?
11,43,23
The response is returned in the format,<hour>,<minute>,<second>.
Note: The systemtime is always returned using 24-hour format regardless of
the current time format setting.
8.4.10.8 SYSTem:TIME <hour>,<minute>,<second>
Sets thecurrent system time to the specified hour, minute, and second.
SYST:TIME11,43,23
The <hour>, <minute>,and <second> parameters must all be supplied. The
<hour> parameter is a one or two-digitnumber (0 to 23). The <minute> param-
eter isa one or two-digitnumber (0 to 59). The <second> parameter is a one or
two-digitnumber (0 to 59).
Note:The system time is always set using 24-hour format regardless of the cur-
rent time setting.
8.4.11 Password Commands
The passwordcommands are used for enabling and disabling the password-pro-
tected commands, for querying and setting the probe password-protected state,
and for setting a new password.
8.4.11.1 SYSTem:PASSword:CDISable
Disables passwordprotected commands.
SYST:PASS:CDIS
Sending this command preventsthe user from accessing the password-pro-
tected settings.
8.4.11.2 SYSTem:PASSword:CENable<pass>
Enables passwordp rotected commands.
SYST:PASS:CEN1234
The <pass> parameter is thecurrent system password. This command must be
sent to allowthe user to access password-protected settings. After sending this
command, use the SYST:PASS:CEN:STAT?command to verify success.
8.4.11.3 SYSTem:PASSword:CENable:STATe?
Returns the current password protection state.
1529 Chub-E4 Thermometer Readout
User’s Guide
116