7.2.3 Test Probe
The TEST PROBEfunction allows you to test the probe characterization algo-
rithmand characterizationcoefficients for a specific probe. The probe and
probe typemust be setup in the EDIT PROBE function prior to entering the
TEST PROBEfunction. When this function is selected, the bottom portion of
the displayshows the probe channel or memory location, the probe serial num-
ber,and the conversion type.
Use theLR buttons to select the channel or memory location. After the
channel is selected, press the Enter buttonto test the temperature calculation
for theprobe. You can enter an input value (Ω,KΩ,or millivolts) and the corre-
sponding outputvalue (e.g. temperature) is shown. Press the Exit buttontoexit
to the menu.
7.2.4 Print Probe
The PRINT PROBEfunction allows you to print probe characteristics to the se-
rial port. Probe characteristics for a specificchannel or memory location can be
43
7 Menu Functions
Probe Menu
1
24.159C
3
24.142C
2
24.634C
4
24.015C
PROBE: CHAN1
SERIAL:
145-560
TYPE: CVD
EXIT
ENTER / MENU UNIT CONTRAST
1529
CHUB E-4THERMOMETER READOUT
Figure16 Test Probe