RIP Configure Commands
configure router rip interface distribute_list
This command configures the access list to be used to filter either incoming or outgoing routes for this interface. This command is used in conjunction with the redistribute command.
Parameter | Description |
access_list | Access list number |
| Enter a number. |
direction | Traffic flow direction |
in | Inbound |
out | Outbound |
|
|
syntax:
[ no ] distribute_list < n > < in out >
example:
This example sets access list >2 to be used for all inbound routes for this interface.
related commands:
configure router rip interface authentication configure router rip interface metric configure router rip interface mode configure router rip interface neighbor configure router rip interface passive configure router rip interface split_horizon
applicable systems:
All models.
June 2004 | © 2004 Foundry Networks, Inc. | 11 - 7 |
