Foundry
configure router rip interface neighbor
This command specifies a RIP neighbor for a specific interface.
Use this command multiple times to add multiple neighbors. When neighbors are specified, RIP updates are unicast to those neighbors (and not broadcast or multicast on that segment).
Parameter Description
ip_address | Neighbor IP address |
|
|
syntax:
[ no ] neighbor < ip_address >
example:
This example configures IP address 192.168.31.2 as a RIP neighbor of interface
Ethernet 0.
related commands:
configure router rip interface authentication
configure router rip interface distribute_list
configure router rip interface metric
configure router rip interface mode
configure router rip interface passive
configure router rip interface split_horizon
applicable systems:
All models.
11 - 10 | © 2004 Foundry Networks, Inc. | June 2004 |
