RIP Configure Commands
configure router rip interface
This command enables RIP for an interface.
The interface is identified by the interface name. Use ethernet0 for Ethernet 0 and ethernet1 for Ethernet 1. WAN interfaces are identified by bundle names. If no other RIP interface command is given, then the interface is configured with default RIP parameters.
Parameter | Description |
name | ethernet0, ethernet1, or a bundle name |
dlci | PVC identifier; enter a number. |
| Use only for an encapsulated fr bundle. |
| The range is 16 - 1022. |
|
|
syntax:
[ no ] configure router rip interface < name > [ dlci < n > ]
example:
This example configures the Ethernet 0 interface for RIP.
related commands:
configure router rip interface authentication
configure router rip interface distribute_list
configure router rip interface metric
configure router rip interface mode
configure router rip interface neighbor
configure router rip interface passive
configure router rip interface split_horizon
applicable systems:
All models.
June 2004 | © 2004 Foundry Networks, Inc. | 11 - 5 |
