Foundry Networks AR1216, AR3202-CL, AR3201-CL, AR1204 Configure router ospf interface deadinterval

Foundry AR-Series Router User Guide

configure router ospf interface dead_interval

This command sets the time, in seconds, that an OSPF neighbor will wait for a hello packet.

Once the user-defined time expires, the interface assumes that the neighbor is down. The value entered should be approximately four times the value of the hello_interval.

Parameter	Description
dead_interval	Time, in seconds
	The range is 1- 65535; the default is 40.

syntax:

[ no ] dead_interval < n >

example:

Foundry-AR1208/configure/router/ospf/interface# dead_interval 50

related commands:

configure router ospf interface authentication configure router ospf interface cost configure router ospf interface hello_interval configure router ospf interface neighbor configure router ospf interface network configure router ospf interface poll_interval configure router ospf interface priority configure router ospf interface retransmit_interval configure router ospf interface transmit_delay

applicable systems:

All models.

9 - 26 © 2004 Foundry Networks, Inc. June 2004