Chapter 10
OSPF Show Commands
Use OSPF display/show commands to display all configured OSPF information.
NOTE: The CLI commands “show” and “display” can be used interchangeably.
show ip ospf area
This command displays configuration information about an OSPF area.
Parameter | Description |
area_id | OSPF area ID |
| Enter either a decimal number or an IP address. |
|
|
syntax: |
|
area [ area_id ] |
|
example:
Foundry-AR1208# show ip ospf area 1
# show ip ospf area_id 1
Area 1
Number of interfaces in this area is 0
Area type is NORM
June 2004 | © 2004 Foundry Networks, Inc. | 10 - 1 |
