Foundry AR-Series Router User Guide
Step 12: Display firewall policies in the internet map in detail (applicable only if firewall license is enabled):
Router1# show firewall policy internet detail
Policy with Priority 1000 is enabled, Direction is inbound
Action permit, Traffic is self
Logging is disable
Source Address is any, Dest Address is any
Source Port is any, Service Name is ike
Schedule is disabled,
Bytes In 0, Bytes Out 0
Policy with Priority 1024 is enabled, Direction is outbound
Action permit, Traffic is self
Logging is disable
Source Address is any, Dest Address is any
Source Port is any, Dest Port is any, any
Schedule is disabled,
Bytes In 0, Bytes Out 0
Step 13: Configure firewall policies for a group of mobile users to allow access to the local LAN (applicable only if firewall license is enabled):
Router1/configure# firewall corp
Router1/configure/firewall corp# policy 1000 in address 20.1.1.100 20.1.1.150 10.0.1.0 24
Router1/configure/firewall corp/policy 1000 in# exit
NOTE: The address range in this command typically matches the address range configured in the dynamic IKE policy (see Step 4).
Step 14: Display firewall policies in the corp map (applicable only if firewall license is enabled):
Router1# show firewall policy corp
Advanced: S - Self Traffic, F -
R-
Pri | Dir | Source Addr | Destination Addr | Sport | Dport | Proto Action Advanced | |
1000 | in | 20.1.1.100 | 10.0.1.0/24 | any | any | any | PERMIT E |
|
| 20.1.1.150 |
|
|
|
|
|
1022 | out | any | any | any | any | any | PERMIT SE |
1023 | in | any | any | any | any | any | PERMIT SE |
1024 | out | any | any | any | any | any | PERMIT E |
15 - 42 | © 2004 Foundry Networks, Inc. | June 2004 |
