OSPF Configure Commands
configure router ospf area virtual_link
This command defines an OSPF virtual link for an area.
Establishes a virtual connection to the backbone for an area border router that is not physically connected to the backbone. A virtual link requires that each virtual link neighbor must include the transit area ID and the virtual link neighbor’s router ID.
Parameter | Description |
virtual_link | IP address for the virtual link. |
| Enter an IP address. |
|
|
syntax:
[ no ] virtual_link < IP address >
example:
related commands:
configure router ospf area virtual_link authentication
configure router ospf area virtual_link dead_interval
configure router ospf area virtual_link hello_interval
configure router ospf area virtual_link retransmit_interval
configure router ospf area virtual_link transmit_delay
applicable systems:
All models.
June 2004 | © 2004 Foundry Networks, Inc. | 9 - 13 |
