Fujitsu 2.1 STXV0302 ERROR Invalid parameter. Parameter = "Parameter", STXV0303 ERROR Management file cannot be found., STXV0304 ERROR Failed to access copy set information., STXV0305 ERROR Invalid copy set information., STXV0306 ERROR Source disk number cannot be found in Management file.

Chapter 9 Messages
9.2 Command Messages
ETERNUS VSS Hardware Provider 2.1 User’s Guide
Copyright 2012 FUJITSU LIMITED P3AM-4582-03ENZ0
106
■STXV0302 ERROR Invalid parameter. Parameter = "Parameter"
[Meaning]
The specified "Parameter" is invalid. The process is canceled.
[Action]
Correct the parameter, and try again.
Check the mount point if it has been specified.
When -t is displayed for "Parameter", check that the OLU number is correctly specified after the
-t option.
■STXV0303 ERROR Management file cannot be found.
[Meaning]
The copy set management file does not exist. The process is canceled.
[Action]
Register the copy set information for the copy set file, and try again.
■STXV0304 ERROR Failed to access copy set information.
[Meaning]
Failed to access copy set information. The process is canceled.
[Action]
Register the copy set information for the copy set file, and try again.
■STXV0305 ERROR Invalid copy set information.
[Meaning]
The copy set information is invalid. The process is canceled.
[Action]
Delete the copy set management file ("installation folder"\etc\vss\copyset.cnv).
Register the copy set information for the copy set file, and try again.
■STXV0306 ERROR Source disk number cannot be found in Management file.
[Meaning]
The target disk cannot be found in the copy set management file. The process is canceled.
[Action]
Check the copy set information for the copy set file. If the disk is not defined, register the copy set
information for the copy set file, and try again.