Chapter 9 Messages
9.1 Event Log Messages
ETERNUS VSS Hardware Provider 2.1 User’s Guide
Copyright 2012 FUJITSU LIMITED P3AM-4582-03ENZ0
85
■Event ID: 1001
Type:Information
Messages:STXV1001 INFO VSS Hardware Provider Communication Server service has started.
PID = [process ID]
Details:
The ETERNUS VSS Hardware Provider Communication Server service has started.
■Event ID: 1002
Type:Information
Messages:STXV1002 INFO VSS Hardware Provider Communication Server service has stopped.
PID = [process ID]
Details:
The ETERNUS VSS Hardware Provider Communication Server service has stopped.
■Event ID: 1003
Type:Error
Messages:STXV1003 ERROR "0" is specified for the port number of VSS Hardware Provider
Communication Server service.
Details:
"0" is specified for the port number of ETERNUS VSS Hardware Provider Communication Server
service. The process is canceled.
Check that the port number of the ETERNUS VSS Hardware Provider Communication Server
service (stxvcommunication) is not "0" in the System
drive:\WINDOWS\system32\drivers\etc\services file.
■Event ID: 1004
Type:Error
Messages:STXV1004 ERROR An error occurred when creating the communication environment
for VSS Hardware Provider Communication Server service. iReturn = [internal code], errno =
[error number]
Details:
An error occurred when creating the communication environment for the ETERNUS VSS Hardware
Provider Communication Server service. The process is canceled.
Try again in a few minutes. If the problem still persists, refer to "10.2 How to Obtain Error
Information" (page 131), and prepare the required information before contacting a Fujitsu field
engineer (FE).