Chapter 4 Environment Creation
4.1 New Installation
ETERNUS VSS Hardware Provider 2.1 User’s Guide
Copyright 2012 FUJITSU LIMITED P3AM-4582-03ENZ0
41
3After installation, continue to set the environment. The following window appears.
4Select "Stand-alone (Local copy)" and click the [OK] button.
When the [Skip] button is clicked, installation completes without the environment being set. Set a
Shadow Copy destination after the installation.
Refer to "6.1 When Changing the Shadow Copy Destination" (page 45) for details.
5The following window to register a Shadow Copy destination in the target disk pool
management file appears.
If multiple mount points or drive letters are allocated to one disk, one of them is displayed.
Select the disk that is to be a Shadow Copy destination from [Disk list] (multiple selections can
be made), and click the [--->] button and then [OK] button to register the disks in [Target disk list]
and [Used target disk list] in the target disk pool management file.
If the ETERNUS Disk storage system setup has not completed yet, click the [CANCEL] button.